Archiv der Kategorie: Bits&Pieces

Komponenten, Werkzeuge und was man sonst so alles braucht .

Fulcrum Laufräder: Die Nippel

Fulcrum ist die B-Brand von Campagnolo. Warum das Unternehmen auf die Idee gekommen ist, eine zweite Marke zu lancieren, deren LRS sich auch nicht wesentlich von den Campagnolo Modellen unterscheidet ist mir schleierhaft. Egal. Campagnolo Zonda bin ich lange gefahren, zwei Generationen, und das Modell mit der G3 Speichung hinten und vorne (ca. 2006) finde ich nach wie vor sehr schick, viel schicker als die axiale Speichung die heute verkauft wird.

Heute

MINOLTA DIGITAL CAMERA

Früher. War natürlich alles besser.

Die Campa Zonda Räder sind sehr stabil, aber wehe eine Speiche reisst. Das führt zunächst einmal dazu, dass man nicht weiterfahren kann, da es gleich einen riesigen Schlag gibt. Und dann braucht man ein perfekt eingespieltes Team japanischer Mechaniker, um das wieder gerade zu biegen.

1005 The really last ride 01 pro tyre team

Am allerschlimmsten ist das Reinfummeln der Nippel. Die Doppelwandige Felge ist nämlich auf der Rückseite nicht durchbohrt, so dass jeder einzelne Nippel durch das Ventilloch in den Zwischenraum zwischen den Felgenböden eingefädelt werden muß, um dann mittels Magneten an seinen Bestimmungsort geführt zu werden. Eine Arbeit, die etwa soviel Spaß macht wie Tütenkleben im Knast.

Dies kann man hier auf diesem Fulcrum Werbevideo sehr schön sehen.

Ab ca. 3:31 min. Wird hier verkauft als a) super Handarbeit und b) „This is know as lacing the wheel.“.

Finde ich nicht. „This is know as shitty Italian product design which makes our life unnecessarily difficult .“Trotzdem gute Räder. Aber wehe, eine Speiche ….usw.

 

Ein Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Verrückte Fibern im Versuch.

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Fünfundsechzig Gramm

Tobias machte mich gestern darauf aufmerksam. Die ganze Geschichte mit allen leichten Details ist auf dem Forum Light Bikes nachzulesen. Im Prinzip geht es darum, dass zwei Lightweight Weenies sich ein handelsübliches, sauteures Shimano Dura Ace Schaltwerk besorgen und nun anfangen mit einem Dremel davon Material abzuschneiden. Einmal in rage gekommen muss immer mehr weg, und so bleiben von den ursprünglichen 180 bis 190 Gramm gerade einmal 64 Gramm übrig. Das ganze wird rot und schwarz eloxiert, sieht hübsch aus und landet vermutlich in einer Vitrine.

64g-Dura-Ace-Derailleur1-499x600

Die Story wurde dann heute von Bike Rumour aufgegriffen (englisch).

FOUND: OUTRAGEOUS 64G DURA ACE DERAILLEUR

posted by Zach Overholt – May 29, 2013 – 2pm EDT

There are self professed weight weenies out there who bolt on the lightest weight parts they can find, and then there are theses guys – dare we say light weight artists? Found over on the Light-Bikes forum, this stunning 64g (!) derailleur is the product of a duo who go by the handles of FastDad and Cola Wheat. What started life as a spare Shimano Dura Ace 7800 rear derailleur weighing a rather portly (comparitively) 180-190g, was morphed into the show stopper seen above complete with a carbon b-spring. Yes, a one-off carbon spring.

Check out the details, next.

 

Original Dura Ace Derailleur

Tuned Dura Ace Derialleur

Based on the looks of things, Stefan who goes by FastDad is quite handy with a Dremel – this is part of where the art comes in. Not only was he able to get the weight down to a very impressive 69g before handing it off to Cola Wheat, but the lines of the cutouts are beautiful. By just looking at it you’d have a hard time figuring out it was done by hand. At the top is an exploded diagram with every stock piece weighed, with the modified versions and the addition of the first cage below.

Tuned Dura Ace Derialleur 2 Tuned Dura Ace Derialleur 1

The final result from Stefan is impressive enough as it is, but it gets better.

Carbon Spring

After the hand off was made to Cola Wheat, Thomas started his magic by building a carbon fiber b-spring! Thomas actually goes into pretty great depth on the creation of the springwhich weighs just over 1g.

10g Cage 64g Dura Ace Derailleur 2

In addition to the beautiful anodizing, Thomas also provided the new Tron-esque derailleur cage and pulleys. Total weight for the entire cage is 10 grams.

64g Dura Ace Derailleur 3

All said and done you have a functional derailleur that weighs less than half of the original. I don’t want to know how many hours went into this thing, and I certainly don’t want to be around if it ever gets ripped off by an errant stick, but it sure is nice to look at.

Nice work.

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Monkey Light

http://www.kickstarter.com/projects/minimonkey/monkey-light-pro-bicycle-wheel-display-system/widget/video.html

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Besuch bei NITTO

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Japan, Mob

Edelhelfer. Lightweight.

via bike radar. Mit 65€ offiziellem Verkaufspreis noch nicht einmal das teuerste Teil das jemals auf dem Markt war, wie Bike Radar betont. Da gab es einmal 2009 einen 100€ teuren Campagnolo Record Halter. Der Rekordhalter.

1368012414563-17nsqxbei9378-670-75 1368012414562-ccf2bo6cxz21-670-75

1368012414562-ccf2bo6cxz21-670-75 1368012414563-17nsqxbei9378-670-75 Eine echte Tune Konkurrenz!

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Variationen der Campagnolo Delta Bremsen

Alles über Campagnolo Delta Bremsen in einem neuen Post hier.

 

01

 

Campagnolo Delta Bremsen der 2. Generation mit Dreigelenk.  Ein weiteres Beispiel für die damals übliche Praxis von Radmarken die Delta Bremsen (aber auch andere Campagnolo Komponenten) zu kaufen und diese weiter zu veredeln. Diese hier brachten 1.125 $ auf Ebay im letzten Monat, was so etwa das vier bis fünffache des gängigen Marktpreises ist. Durch Polieren, durch das eingravieren und einfärben von Logos. ICS (Italcicli Cycle System) war eine Schweizer Firma die Räder extrem aufgepimpt hat, vermutlich für Bänker, Rechtsanwäte und Zahnärzte. Ist dann 2001 auch prompt pleite gegangen.

Man schaue hier.

ICS_Cat_1

Gibt es übrigens auch in Gold. Muss wohl irgendwie in der Zeit entstanden sein, als die Uhrmacher nicht so viel zu tun hatten.

Brake_caliper_rear_2auch hier.

<Und ein weiteres Schnäppchen.

 

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

25,5 Gramm

27

Ich habe auch so einen der knapp unter 100 Gramm wiegt, no name, vermutlich aus China, gibt es bei vielen Anbietern zum Beispiel hier. Erstaunlicherweise ist das Ding auch fahrbar, obwohl länger als eins zwei Stunden macht das auch keinen Spaß mehr.  Bei diesem hier scheinen aber auch noch die Befestigungsschienen für die Sattelstütze zu fehlen.

DAS Problem an Carbonsättel ist, das sie sehr glatts ind. Das Fahrgefühl ist ganz anders als bei Ledernsätteln da man mangels Reibung ziemlich stark hin und her rutscht.

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Neues Zeuch von Fyxo

Ach ich liebe dieses sinnlose Zeuch von Fyxo. Habe ich nicht schon genug Wasserflaschen zuhause? Brauche ich irgendwelche Aufkleber für irgendetwas? Nein. Aber trotzdem. Wer Interesse an einer Sammelbestellung hat möge sich melden.

bidons__31693.1367569028.1280.1280 FYXO_bidon__25225.1367568958.1280.1280 orange_bidon__93704.1367568953.1280.1280

Fyxo Flaschen

stickers__05987.1367569377.1280.1280

Fyxo Aufkleber

 

 

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob

Hydraulische Felgenbremsen

Hm, ich bin mir ja nicht sicher, ob der Trend bei Rennrädern wirklich zu hydraulisch-mechanischen Scheibenbremsen geht. Vielleicht bin ich einfach zu sehr genervt von den Hayes Scheibenbremsen an meinem 2005er Cannondale Bad Boy und in der Zwischenzeit hat sich technologisch eine Menge getan.

Bei hydraulischen Felgenbremsen bin ich mir noch unsicherer. In Deutschland sieht man diese sehr häufig an Trekking Rädern,  sonst in der Welt vermutlich eher selten. Deutsche Trekkingräder sind auch wirklich einmalig und entsprechen doch sehr stark unserem typischen tun und denken. Magura.

Jetzt bringt SRAM doch eine hydraulische Felgenbremse für Rennräder heraus (in der RED Hierarchiestufe), das Folding Bike Blog berichtet darüber. Das muss wohl mit den alten Sache Ingenieuren zu tun haben, die Sie bei der Akquisition der Marke übernommen haben.

SRAM-RED-Hydro-HRR-Caliper-789x1024

The other day we discussed disc brakes on road bikes, which seems to be the next big thing coming to the world of competitive road cycling. Not everyone is on board though, as they are a bit heavier than traditional road calipers, and to be honest, people are simply resistant to change. So for those of you not ready for disc brakes, but want some of the performance benefits, SRAM has an answer.

With a hydraulic caliper, you can apply the maximum force to the brake system much more easily, and this allows for more accurate control of the braking. You have the ability to modulate between applying light pressure and braking hard with just a slight squeeze. Perhaps the biggest advantage comes if you’re a fan of drop bars. If so, you probably spend the majority of your time with your hands on the hoods. You can brake from there, but normally with a cable system, you need to move down into the drops to get enough leverage to really brake hard. With a hydraulic system, you can easily apply the maximum braking force from the hoods. A light tug is all it requires.

SRAM_RED22HydroSLcomposite

When compared to disc brakes, the hydraulic calipers are still going to have some of the same drawbacks of traditional rim brakes. You’re still using the same rim and the same brake pads. The materials used to make lightweight rims, usually do not make the best braking surfaces. You’re still limited by that fact, and you’re still going to experience decreased braking power in wet weather.

But it’s no doubt a big improvement, and you can get the advantages of hydraulic without investing in a new frame with disc mounts, or new wheels or hubs to accommodate disc rotors. You can even put them on anyMontague Pavement folding bikes. Hydraulic disc brakes are already the norm on mid level to high end mountain bikes, and it’s not surprising that road bikes are moving in the same direction. Will everyone move to disc brakes? Are the hydraulic calipers here to stay? Only time can tell, but we certainly get to see some interesting innovations in the meantime. If you’d like to see more about SRAM’s new products, check out their website here.

Hinterlasse einen Kommentar

Eingeordnet unter 2013, Bits&Pieces, Mob