Archiv der Kategorie: Bremen

Projekt X Ride 1

Bike Porn 1: KNC aluminium 7075 jockey wheels with ceramic bearings. Matching low weight titanium screws. Powered by Wippermann Connex gold chain. Experiments have shown that you can ride an average Paris – Nice stage 5.17 seconds faster with this set up.

Today was the day when I was asked to collect project X from the big bike dealer at the the other edge of the town. Yes, I was supposed to assemble project X completely on my own but I had to give up on some parts.


Well that is actually also the reason why I like to work with old bikes. It isn’t that costly if you break something. On the other hand, if you put too much torque on the screws connecting the stem with the carbon handle- easily within milliseconds 10.000 Yen are gone forever.


Never mind that nasty thought. Today I learned that:


a) It is better to shift into highest gear before installing shifting wires as otherwise you can do it again.


b) There is actually another spacer between the wheel and the cassette even if you match a Shimano Dura Ace cassette on a Shimano freewheel.


c) You cannot mount a SRAM crank set in a Shimano specific bottom bracket.


As you may have already guessed, there are smaller and bigger Yen signs behind each bullet point.


I had my thought with Japan today and again. So I decided to take one day of holiday in order and do some riding. Before I rode out, I posted a longer post about elevator safety in case of earthquakes on the TCC blog. I hope it can be of help. This is different from writing hilarious stories.


So I rode out along the river Wuemme where the reed harvest was in full swing.



Project X is a very light bike, the lightest bike I ever had and it behaves pretty nervously. This is also the first time I ever use a bike with tubeless tires and I glued them on by myself so I didn’t felt very comfortable on the bike today. But its fast when it goes straight. And climbing trunk road pedestrian overpasses is a piece of cake with this baby.


I thought that I was faster as usual while staying in the lower 140 HRM range. On the way back I also found out why: It was an exceptional windy day and I could hardly ride at 25 km/hr back.


I have a workshop with my students next weekend in a youth hostel about 100 km away from Bremen. Weather permitting I will ride there by bike, but which one?

Bike Porn 2: Syntace 99 stem with titanium screw: less than 100g. Otherwise mostly carbon.

I like the concept of Project X: A cheap, average aluminium frame equipped with nice components. The frame is made by Easton under the name of the Italian brand. Nice orange color. 

Orange Aluminium screws combined with the N of „Faggin“. Of course it never works out like that. Too many standards. Think 31.6 mm seat post diameter.

Bike Porn 3: Full carbon saddle. Less than 100g. Less than 10.000 Yen, so even cheaper than my Selle Italia. 
Bike Porn 4: The power train. Blue valve cap brings luck to the owner. SRAM crank from the original Cervelo setup, later replaced by Ultegra 6700. This bike has nothing that isn’t necessary. Note the missing front derailleur and smaller chain ring. With a 12 – 28 in the rear never mind in Bremen. By the way, stronglight chain rings don’t fit on SRAM cranks. One also need special single speed screws for assembly if only one chain ring is used.


5 Kommentare

Eingeordnet unter 2011, Bremen, Faggin Toppolino, Meine Räder, Mob, Touren

Moser Leader AX Frame

Ah, a Francesco Moser bike…..
Moser Leader AX Evolution Frame Size 56 cm. A typical Italian engineered product: Beautiful design, top notch engineering and some miserable details: integrated quil-stem for teh saddle post.

 „Unifork“ , according to Hiroshi this qualifies the bike from selling in Japan. But…

… the fork is open at the drop-outs. I guess this is due to weight savings? Or just sloppy craftmanship?
Of course, a bike like this must be equipped with Campagnolo components. Old Athena head set.
This is a used frame and it has some wounds.
Dedacciai tubing. „Modern“ steel technology. Forget Columbus, Reynolds or Oria.
The integrated seat post design. Looks alomst like an aluminium frame.
Some work to be done.
But generally the frame is in good conditions. Although perhaps not good enough for Japan.
Wishbone type brake bracket.
A wonderful frame indeed and I would really love to built it into a complete new bike with modern components. But the frame size is just too small.
I came out of the garage (aka as area 51) yesterday and just by chance my wife as arrived with the family car. She noted the Project Galibier and said „Oh, another bike, is this not your third one?“ It was a classical situation, first I wanted to mutter somethinga long the lines „Well, it isn’t like it looks like, please let me explain….“ But then I realised that my wife has missed purchase of #3, #4, #5 and #6 so I could answer with gusto: „No, this is not my third bike!“.
Anyway, there is hardly place in the garage left.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Mob, Moser Leader AX

Area 51 and Area 52

Area 51 is the garage next to our house where I work on „some“ bicycles from time to time. It is a highly classified area, protected by the home turf security act against female members of the family and it receives almost unlimited funding. Recent research at area 51 has led to the development of „Project Galibier“ and „Project X“.
It is although not the only classified area in or close to Bremen.

After getting the Cervelo ready for spring on Sunday, I took it out for a 100 km ride. I had eaten almost nothing when I jumped on the bike and I wanted to take it easy and ride in the 140 HRM bracket. It was a beautiful day, still cold, but definitely the feeling of spring was in the air. There were lots of people on the road at the river Wümme and the weather-harded Bremenites took the opportunity to eat and drink at makeshift tables outside of the rural cafes.

I opted again for Ritterhude and did the three climbs, each one for 20m. The carnival season has started in earnest; although the event is much less pronounced in the North of Germany. But still a lot of children dress-up and much glass is littering the roads and bike path.

I got lost in Osterholz-Scharmbek and suddenly found myself riding in Western direction towards Schwanende, Farge and the river Weser. I have never been before in that area, but it was nice and a little bit hilly. I finally arrived at „Area 52“ which is a military training complex close to Farge (you might recall that Farge indeed has a long militar history. This is where the submarine „Bunker Valentin“ was built.)

The road leads straight through the training ground. At one point there is a barrier where the traffic stops. But I asked some by passers and they told me that it is OK to ride through. So I did. There is a nice, wide road, completely free of traffic and people. One constantly has the feeling that a tank might break through the bush like a giant wild boar, or that a MG company might sit in hiding somewhere and watches, finger on the trigger. Later I realized that this is the closest I got so far to this feeling of exploring new and unknown territories when crossing barriers and gates of rindos in Japan.

I arrived in Farge and was lucky that the ferry over the river Weser had just arrived. On the other (Western) side of the river, I continued to ride South. The roads are leading through old villages lined up in the shadow of the river protection walls. At Lemwerder exists the huge area of the Lürssen wharf. Yes, warships again, but also luxury yachts for Roman Abramowitsch, Larry Ellison and the other usual super rich of this world.

From there I entered Bremen again and rode home through the city. Of course I did the usual climbing exercise at the Kurfürstenstrasse pedestrian overpass.

I wasn’t fast, but including the time on the ferry it took me less than 4,5 hours for the whole 100 km and I stayed generally low in the HRM despite some tailwind. I will try to do more basic training to built up the fundament for longer rides later this year.

What I am lacking in terms of performance will be compensated by Project X. Hopefully.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Cervelo Soloist, Mob, Touren

Powered by Mosburger

I took Friday off to clean my bikes and bring law and order to my garage


It has been a long winter and still during the night temperatures are dropping below freezing point. But the weekend surprised with some sunny days. I started to clean all my bikes and remove the true winter grit. Bad Boy and Gazelle are looking better now and with some oil, grease, new brake pads and adjustment of the rear derailleurs they are running fine again.


Finally I had all parts together to re-fit the Peugeot Galibier. As the Galibier will never become a fast bike, I bought a new stem, handle bar, grips and the most beautiful brake levers and assembled the whole thing on the bike on Saturday.



I am not sure why, but every time, I look at the front of the Galibier I think about Teriyaki burger. How I miss that stuff!


I bought also a nice „Bremen type“ vintage Dura Ace cassette for the Galibier. Instead of the almost „compact-like“ 12 – 19 5 speed cassette< I mounted a 11 – 15 one which combined with the 53/39 front crank provides optimal choice for Bremen and surroundings.



Looking at the Peugeot I realized today, that I learned a lot about cycling parts in the last weeks and that I am able to do many things on my own with the help of a rather extensive collection of tools. Nevertheless, there are still many things that drive my crazy: The handle can still be turned in the grip of the stem, despite the fact that it is tighten to the maximum. No idea why this is so, I can only assume that the diameter of the handle bar is too small. I can also not install bar ends, which would support the conclusion in the last sentence. And after exchanging all brake wiring (I left the old handle assembly with stems and wires as it is, so it can be mounted easily on another bike) I cannot properly adjust the rear brake. The only way to tackle all this problems is to sleep one night over it and do it again some other day. In the worse case I have to ask for help at the LBS.


The biggest problem with the Peugeot is, that it is too small. One day when I have found the perfect 58 to 60 cm frame, I will remove all parts and reassemble them on the new frame. Of course this will not work out, as the new frame will have Italian thread bottom brackets and other useless features. So I have to spend heaps of money again


I sold my trusted Zonda wheels which I have used on the Cervelo bike for three years and perhaps 25.000 km. The alu rims would probably have not survived the ups and downs of the Transalp. And now, living n Europe, I thought that some European flair would be nice. So I bought a pair of conventional DT Swiss wheels in white. Of all colors. Standard rims R1.1 and standard DT swiss spokes: 32 in the back and 28 in the front. That should be bullet proof for a rider like me. Replacement spokes are cheap and one can true the wheel on a ride in case one spoke breaks. A safe option.



Ultremo Z1 tyres, in case you wanted to ask. As this would most likely be my setup for the Transalp, I mounted the Ultegra 12-28 cassette from the Zonda wheels. Another surprise was waiting for me: The Campagnolo lock ring doesn’t fit on the standard Shinao rotors. I used one from my Bad boy wheels for the time being.

Please note the orange valve caps.
As Sunday was a really beautiful day, I took her out for ride at noon. But this is another story that will be written tomorrow.

I used the remaining time on Sunday morning to work on Project X. This will be my secret weapon for all kind of ambushes and I am sure it will become as famous as the King Tiger, the F104 Starfighter and the Porsche 911 Carrera. By punishment of exile and death it is not allowed to make photos of Project X, but from time to time some daredevil nevertheless manage to take some blurred shots.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Cervelo Soloist, Faggin Toppolino, Peugeot Galibier, Peugeot SB

Bremen – Berlin – Axis

I visited Berlin with my family last weekend. The purpose was not to ride the bike, but to watch a figure skating competition in which my daughter started.

On Sunday we went to visit Checkpoint Charlie and met Marek, who rode with Positivo in Tokyo some years ago. He now owns a very nice Olmo fixie and runs his own language school Cafe Lingo in Berlin. What I admire is his persistence to travel the world an visit many countries. So I asked him what would be his favourite countries for cycling. Answer: Japan and New Zealand. We both complained about the lack of mountains in Berlin and Bremen and decided to go cycling close to his hometown in the „Harz“ in spring. The highest mountain there, the „Brocken“ has an altitude of 1.141 m.

We went to the German Currwurst Museum after we have met Marek. The Currywurst is very special German food, invented by Hertha Heuser in post WW2 Berlin.

Much to my surprise, a map in the museum showed the places where Currywurst is served in foreign countries. Bernds Bar in Roppongi was presented as well as the lunchbox  Zeitgeist which is located just around the corner from the Positivo Espresso European HQ building.

I registed for the Velothon race in Berlin (120 km) in may as well.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Mob

Shaving off weight

What is the most cost-effective way to lower the total weight of your bike? This is a question I asked myself and perhaps some other members would like to contribute as well.


So let’s start with two examples. Two of the components where most of the weight of a racing bike is concentrated is the frame and the wheels. 



A typical Cervelo S1 frameset retails in Germany for 126.000 Yen and weights 1.460g (size 56) without fork, head set and other components. Bare frame. The Cervelo S3 frame retails for the equivalent of 470.000 Yen and weights only 1.080g in the same frame size. Thus one get 380g of weight saving for 344.000 Yen of additional cost. Or one pays 905 Yen for every g lost.

Now let’s take a look at wheels. A good standard wheel set are the Campagnolo Zondas which I have been using for years. In Germany they are sold for 45.000 Yen and they weight about 1.550g without quick release, rim tape and rear cassette. If you have the courage (and the body weight) to use them, Mavic R Sys SL provide a lighter alternative at 1.295g for 172.000 Yen. So 255g for 127.000 Yen. Or 498 Yen for every g less.


I am aware that all calculation depend on the starting point (which frame, wheel etc. is your benchmark) and how far you will go. The first g less will cost much less than the last one as well.


But I wonder, is there any component that would stick out? Quick release? Tires? Tubes?

Michelin Airstop Air 1 tube with 40mm Presta valve. 93g for 569 Yen. Continental Race Supersonic Tube with Presta 36 mm valve. 45g for 1034 Yen. Less than 10 Yen per g reduced. Well, but it is hard to shave off more than 100g from the total weight by using different tubes. Or no tubes?


Any contributions?

Ein Kommentar

Eingeordnet unter 2011, Bremen, Cervelo Soloist, Mob

Extreme Altitude Training

Todays training led me again to the town of Ritterhude, which is partly located 48 m above sea level. Three major hills, one of them with cobblestones and one even with 20m elevation difference provide a training mecca for the Transalp 2011 in Northern Germany.


Another cold day in Bremen. To solve my „cold feet“ problem I opted today for one pair of woolen socks and another one on top. Plus one カイロ in each shoe plus Assos shoe cover. It felt much better than the last time, but I was only outside for 2 1/2 hours and in addition it was rather warm: Four degrees plus when I rode in the afternoon. What a bliss to ride the Cervelo again. But wait, what’s coming next…..


Riding along the river Wuemme, the swamps to the right were still frozen.

With a nice tailwind that was not too strong and staying below 145 HRM, I made good progress and reached Ritterhude after 25 km. There is a very nice „hill“ that leads up from the river to the main road on a cobblestone street. This is the Ritterhude version of 

this nice hill, located somewhere in Belgium.

There is even a „Kapel“ in the background as well. Sorry if you can’t see the slope. It is ever so slightly. This nice road lead up to the not so nice main shopping street of Ritterhude that in turn turns into a major road leading to Osterholz-Scharmbek. Basically it is the road version of the life of Leif Garrett. But at least there is another slope which adds perhaps 10m followed by the longest slope around Bremen with about 20m elevation difference. DIY center on the right, car dealers on the left. You get the picture. A smaller version of 246.


Then there is a long straight part, until the road makes right turn goes down for about 20 m elevation and come up again. I did this once and back all the way and then I started to do the Kapelmuur again. This added more than 200m of elevation to my training today, which is the rough equivalent of one Otarumi from the Sagamiko side. All data from my Ciclo bike computer, so please be aware that my statements are grossly exaggerated.


I rode back the same way and was home 2 1/2 hours after I left. 70 km of training. My legs, heart and lungs are OK, but I really feel the lack of long rides recently because my upper body, especially the shoulders, are starting to hurt quite fast. 
I also fell down when I accidentally disengaged from the left pedal, so that the bike leaned to the right side where my shoes were still clipped in. I saw it coming but had no chance to escape. But after all the crashes in winter, this was really nothing.


Will be off to Berlin tomorrow. Another figure skating competition. Probably I will meet Marek as well.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Cervelo Soloist, Mob, Touren

Cyrogenic 102

After watching my daughter taking second place in the cup of the federal state of Bremen figure skating competition on Saturday I was motivated enough to focus on my own „sport career“ and venture out into the flatlands of Bremen and Lower Saxony on Sunday.


David was so kind to remind me of Toms wonder weapon (V3 Vlamse Vielrennner Dre) against cold feet, the self heating patch from Japan. Actually we have quite a supply at home, even the shoe specific type, but I was just to stupid to ask my wife so far.
So I left at 1 AM on my Cervelo when temperatures reached – 2 degrees, the highlight of the day. The skies were blue and I enjoyed a nice tailwind riding out along the river Wuemme. My orange Assos jacket offered me good protection against the elements, but my feet got cold as usual. I continued along the river until Lessum where I made a right turn in direction Ritterhude. This is the only road I know that offers some degree of climbing training: First 20 meters up, mainly on cobblestones in the old part of the village and later two times 20 m up, but unfortunately on a congested road leading through industrial wasteland. 


I rode further to Osterholz-Scharmbek and made a right turn in direction SOS landscape and Worpswede. And now I ran fully into a very strong headwind, almost similar to what we have seen here lately. Yes, to have a very light bike can have its own disadvantages.


I arrived at Worspwede back on the usual road and continued in direction Quelkorn and Fischerhude. Riding fully against the wind, my speed dropped to 22 or 23 km/hr. Not only that, but I the wind also contributed in getting my feet and hands very cold. I took a 5 minute break to eat a banana and could hardly use my hands to peel it.


But when I made the turn at Fischerhude and ran North again I enjoyed a tailwind and could easily ride at 35 km/hr without making too much effort. After 83 km distance I was back at the river Wuemme so I decided to go 5 km further North, ride back the same distance and then take the usual 7 km ride home, to make it a full hundred. The first time this year and it is already February.


Before riding home I made a small detour and rode over a pedestrian bridge that crosses a semi-highway close to our house. I like this bridge. It’s a little bit tricky to ride up and it offers perhaps 5 m of elevation training. I never cross the street here at street level, I always ride up and down the bridge. With the Cervelo it is easy to do in the big ring (compact) with the biggest cog in the rear. With the Gazelle I have to choose the small ring plus the biggest cog and even then it is hard work.


I was home after 4:10 hrs and covered 102 km, taking less than 10 minutes of break. It was a good training, but it wasn’t any fun at all. I could barely insert the key in the lock and turn it – my hands were ice.

Of course this is nothing against the pain that Azizulhasni Awang experienced when he crashed on the wooden track in Manchester during a world cup track meeting on Saturday.
The obvious thing to do after such crash is, obviously, to HTFU, get on your feet, on your bike and cross the finish line to win the event. As shown on You Tube.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Cervelo Soloist, Mob, Touren

Der hohe Berg (high mountain)

The only way to add significant elevation meters in and round Bremen is, when you accidentally ride over a cow. So naturally I was very curious, when a fellow professor (sic!) told me that close to his home town called „Syke“ a substantial bump in the landscape would perhaps provide the ideal training ground for Transalp 2011.


Well of course I was not expecting something of the degree of Odarumi Toge, but I thought that at least some slopes would be present. Another cold winter day in Bremen with temperatures hovering around freezing point was awaiting me outside. I fixed some of the bikes in the morning and got the Cervelo ready for the first time this year. So far I have used only the Gazelle (Rain), Bad boy (Snow) and the Peugeot (to show-off). But today the roads were at least dry, so I pumped up the tires of the Cervelo for the 2011 virginal ride.


I hate cold feet. So I wore some light summer racing socks, over which I put some thick woolen socks. On the outside of the cycling shoes I wore the Assos show covers plus an additional rain/windproof shoe cover. No chance, 30 minutes on the road and my feet were cold as liquid nitrogen.


By the way: Assos. I bought an extremely nice Assos Air Jack 851 limited edition, yes, you guessed correctly, in orange. I even own the matching head gear. I am not a big fan of Assos, but nevertheless some of their products are very good I believe (air jack 851, shoecovers, early winter gloves, robocap….) But they are also very pricey. When Assos pops up in my mind the next thought is always „Rapha“. I don’t even own one piece from Rapha – not that I don’t like their stuff. I think they did a lot good for design in clothing and advertising.


Assos designers have difficulties to design decent zippers with functional sliders. The old shoecovers I owned had a metal slider attachment in the shape of the Assos „A“. Depending on the design and the matching of sizes between the shoes and the shoe covers, to put them on can be a real hassle. It was almost impossible to close the zipper without bloody fingers, as he slider attachment was really hard to grap. After a while they broke off as there are to brittle. Really a poor job, given the fact that otherwise the shoecovers are a) warm and b) very expensive.


I have wore the air jack perhaps 4 or 5 times and then the slider was also broken. Send it back to the seller last week. Will get a brandnew jacket next week – I hope it will hold.
Saturday Update: Got it back just new. A beautiful new jacket. Some type of slider though. Claim processing in Germany is really wonderful. However I wish they would do it right the first time.

Perhaps I could wear my bib shorts over the base layer, extend it towards my neck and fix them there with some safety pins as Carol Ally is showing here.


I left a 1 PM ..wow. the Cervelo felt so great, after riding all this old bikes for the last months. The Cervelo was like a … rocket .. a spaceship …. stellar performance. But as I said, it was cold and the wind was very strong. I rode out of town, then along the river Weser on the West side in direction South. Normally I stay on the East side of the river, very rarely I venture out to the West. Dreye, Kirchwehye, Barrien… I mention these names because perhaps Ludwig got a paramedical training in one or the other village. Cold, windy, cloudy, not too much green, long straight roads, no fun.


Finally I made it into Syke, and yes, there were some hills there. I enjoyed the climbs, although no one got me more than perhaps 15 m elevation difference. And even that is probably grossly overstated. It took a while before I found the road to „der hohe Berg“ but I couldn’t see any rise in elevation. The road was flat as…. as….as any and all roads here are flat in the area.


The I noted that the street on the right side was named „der hohe Berg“ so I made a right turn and followed the road to its end. And there it was the high hill: A whopping 3 meters above average surface level that warranted the construction of an observation tower.



Total elevation above seas level: 63 meter. If you climb the tower, about 20% more.
But be careful, the tower may swing which is , as a warning notice explains, „due to nature“. I personally feel that it is more likely due to „poor engineering“ or „poor construction execution“ or perhaps to the laws of physic. Only after that, one may be allowed to blame nature.



OK, my feet weren’t getting any warmer so I rode home and fiddled around with the Faggin frame. If this bike will ever get ready, it will become a very interesting one. My goal is to built a very light bike for Bremen, actually the lightest bike I ever had – without me. Meaning? Well I am a little bit tired of this theoretical discussions about weights of bikes; like 41 cm frame size as representative. And I never understood why bike weights are always measured without pedals? You need pedals to ride a bike, right? Just as you need a handle bar or wheels. And when you ride out you need a water bottle, a repair kit, a pump, some lights and and and….. So let’s define this as the bike riding weight: Get naked on the scale, then dress up, make yourself ready for the ride and get back on the scale with the bike in your hands. How much is the difference?


Of course I will use some small cheats. For example I will not mount a front derailleur. I have one, but why should I mount it? I never ever used a front derailleur in Bremen. Unless I accidentally ride over cows, of course.

Well, the next months I have to train hard, so that in June David, Juliane and David again don’t have to wait for hours on top of every fricking pass in the alps. Why did I come to this conclusion? Because recently I had an interesting telephone conversation with Hiroshi. He said, that David is training hard and shed a lot of weight, so he became really fast and has tons of stamina. Enough for every single pass in the alps. I, on the other hand was assuming that I was the faster rider per se (although, I have to admit, I have been faster only for a very short period in time: in 2008 my goal for Fuji hill climb was to „tonikaku“ beat David regardless of the result). So my training for Transalp consisted of eating chocolate bars and doing long hours in the university until I finally reach the performance level of David. I wasn’t aware of the very unfortunate fact that his performance level line over time was moving in the opposite direction. Some month ago our lines crossed (so that would have been the perfect week to tackle the Transalp) and now there is a considerable difference to my disadvantage. Shit, I have to buy another bike to compensate.

4 Kommentare

Eingeordnet unter 2011, Bremen, Cervelo Soloist, David, Mob, Touren, Transalp

Bremen Six Days


I left work early and went to the LBS to fetch the Peugeot Galibier. Nothing had been done and they promoised me to finish the setup today. All nice guys but German service …. another night out in the rain on the yard for my bike…heartbreaking.


My son hat some surprises for me when I came home afterwards: An A in mathematics (thanks to the engineering genetics of his father) and a F in German (probably thanks to his mother). Anyway, as promised I took him out to the Bremen Sixdays race.


The race is hold at Bremen Arena, a trade fair and event ground and now in its 46th year. According to the announcer, it is the biggest sixday race in the world, whatever that means. The track is 166,67 m long, made completely out of wood and only manufactured for the event; afterwards it is dismantled and recycled (perhaps). German carpenters in their trademark black work clothes were constantly checking during the race if everything holds up.

Due to the short length and the tight curves the banks are very steep. The straights are short and the riders are mostly moving in curves. When I came in a German Enka band was playing so we were forced to leave immediately and enjoy some mediocre food. Yes, eating out in Germany, what a mess. Even my son, when asked yesterday what he misses most from life in Japan answered „restaurants“ as his first thought.

Somehow naively I thought that during a six days race the riders are riding continously for six days. The impression was left on me by Erwin Kisch, a famous journalist from the twenties, who rode about the six days race in Berlin and called it the „ecliptial treadmill“. Yes, before the war the ride was continous but this is now a thing of the past, thanks to the efforts of the six days riders labour union. By the way, ecliptical, what nonsense to engineering ears! The from of tracks is of course clodoidical (x“’=constant) in order to avoid sudden centrifugal accelerations.


Yesterday night we saw three events. The first one was a point race. Every 10 laps the first to forth placed riders were given points based on their ranks. This continued for 60 laps. The interesting part is, that the changes between the riders are very frequent, say, every 3 or 4 laps. And the way these guys changes is amazing: The rider on the track is overtaking his teammate on the inner, lower side in the curve, the new rider is accelerating than overtaking him on the outside and while doing so their hands lock in and the previous rider is giving him a big push so that he comes up to speed. This is amazing to see just as a single event but when you see 4 or 5 teams changes at the same time with all 24 riders of 12 teams on the tiny track and how to manage to manouver around each other without crashing it is really amazing. I wish I would have the same amount of control over my bike. No, actually over my family or even better my life.


The second event was a 166.67m time trial. Each of the 12 teams had the stronger rider going alone, but as in the first event, the other riding was drafting him first and gave him a big push just before the start line. The resulting speed was well over 60 km/hr average for one lap and the fastest rider did it in less than 9 seconds.


The third event was the longest one, called „Big Wild Hunt“. The teams were riding for 45 minutes and it was their goal to escape from the „peloton“ and catch up the peloton from behind again, thus having made one more lap than the rest. The lap count is the decisive factor at six days races, even today; but for 100 points gained one get 1 extra lap and within the same lap count the team with the most points wins, so it is important also to look out for opportunities to save points. That event was the most interesting, as escape groups were constantly formed and again, as in the other events, the change between riders of the same team was constantly going on. Interesting to see an escape group of say, three riders in front (or in the back?) and then one or two riders are exchanged from within the group.


For me it was very exciting and even my son managed to look up from his Nintendo DS from time to time. By now it was 10 PM and „Middle of the Road“ threatened to appear and perform their timeless pieces of middle of the road music. It was as pleasant as seeing the Fuehrer rising out of black ashes in Berlin again and we left in sheer terror. We also missed the second showhighlight „Klaus and Klaus“ (an Enka Duo that had one hit in the seventies“On the shores of the North Sea“), which is similar to the return of Stalin and Beria.


Nice event, photo taking was not allowed, security everywhere. Sorry for the poor quality photo.

Hinterlasse einen Kommentar

Eingeordnet unter 2011, Bremen, Mob